English
Introduction:
Integrating an advanced hot water circulation system into your plumbing infrastructure can provide many benefits, such as improved hot water efficiency, minimized energy consumption, increased convenience, minimized waste, and potentially reduced utility bills. This guide provides comprehensive instructions for seamlessly installing this important component in your home.
Section I - Pre-installation Preparation:
1. Shut off the main water supply: To mitigate the risk of leaks during the process, shut off the main water supply first.
2. Determine the location of the circulation pump: The circulation pump should be placed near the water heater, ensuring that all connections are securely fastened and leak-free.
3. Procure appropriate fittings: The circulation pump must be connected to the existing hot water pipes using appropriate fittings.
4. Set the timer function: Many models include timers and integrated sensors that automatically start when the water temperature falls below a preset threshold.
5. Use caution during installation: Avoid over-tightening fittings to prevent damage to pipes.
6. Ensure power supply: Verify that the circulation pump is properly connected to the power supply for function.
7. Install the sensor valve: Place the sensor valve under the sink at the farthest point from the water heater. The device will automatically adjust its opening and closing according to the current water temperature in the pipes, thus ensuring continuous hot water.
Part II - Post-installation testing:
8. Start water supply: After the installation is completed, start the water supply and operate the water device until all bubbles in the household pipe network are eliminated.
9. Enjoy instant hot water: After a successful installation, you can now enjoy the convenience of instant hot water.
Conclusion:
Although the installation of a hot water circulation system may seem simple, it requires careful planning and patience. If you encounter any uncertainties or need further assistance, we recommend that you consult a licensed plumber to ensure a safe and accurate installation procedure. We believe that following these guidelines will help to complete the installation smoothly and efficiently.
